VarTech Systems VT121C Guida Utente

Solutions for Demanding Applications VarTech Systems Inc. Industrial Flat Panel Displays VT121 DiamondVue/CrystalVue Series 12.1” Flat Panel Ser

10

11 Exit Exit the OSD menu and save the settings Position# Autosetup Auto adjust the positions, phase, frequency Yes No Frequency Adjust

12 SECTION 4 TOUCHSCREEN 4.1 Introduction Touch screens are a common means to interface operator inputs to a system. The universal standard of

13 Image position: If it is impossible to position the image correctly, ie the image adjustment controls will not move the image far enough, then t

14 Do not use paper products as they may scratch the surface. To minimize the risk of abrasion, allow the screen to stand dry. Special care should

15 top/bottom of the cutout in the panel. Extra lock nuts and washers are provided.

16 SPECIFICATIONS DIAMONDVUE ENGINEERING SPECIFICATIONS Panel Size 12.1” Type Active Matrix Color Thin Film Transistor (TFT) VT121P2, VT121PSS

17 Storage Humidity 10 to 95%NC Operating Altitude Up to 10,000 ft Storage Altitude Up to 40,000 ft Dimensions 15.0” (w) x 12.5” (h) 381mm

18 SPECIFICATIONS CRYSTALVUE ENGINEERING SPECIFICATIONS Panel Size 12.1” Type Active Matrix Color Thin Film Transistor (TFT) VT121PHB2, VT121

19 Storage Altitude Up to 40,000 ft Dimensions 15.0” (w) x 12.5” (h) 381mm x 317.5mm Cut Out Dimensions 13.7” (w) x 11.25” (h) 347.98mm x 285.

2 User’s Guide Read these instructions completely before attempting to operate your new Color Display. Table Of Contents Page Page Section 1

20 VARTECH SYSTEMS INC. HEADQUARTERS 11529 Sun Belt Ct. Baton Rouge, Louisiana 70809 Toll-Free: 800.223.8050

21

22

3 INTRODUCTION SECTION 1 1.1 About LCD Monitors A liquid crystal display (LCD) is a thin, flat panel used for electronically displaying infor

4 1.2 Product Safety Precautions Ensure that sufficient space is available around the display to provide the circulation necessary for co

5 2.3 What is included with your display VT121P-2 LCD Monitor 5 ft Video Cable. A 120VAC power connection. 10-32 Mounting Hardware.

6 Note: The following figure is the view looking into the pin end of the male connector or solder terminal end of the female connector. Standard

7 2.5 Signal Connections Cont. Optional BNC Adaptor Cable A 5BNC-to-HD15 adapter cable is available. The functions of the cables are described be

8 SECTION 3 3.1 Adjusting the display NOTE: By way of explanation the following refers to a set of sample buttons that may be obtained as an

9 - - decrease the setting / moves the selector to the previous function (under OSD menu on state) - - Load factory default Press and hold SEL DN b